Turbo S2000 (PT5857)

two col ruler

A client of ours has an S2000 that we installed a GReddy turbo kit and tuned it on AEM.  This setup produced 333whp after tuning by Jason Oefelein. 

However, this much power was just not enough for our client.  He did some research and decided on a Mase Engineering turbo kit based on a Precision 5857 turbo.

Precision 5857 Turbo

The Precision Turbo 5857 turbo

mark installing turbo kit

Mark Panic installing the turbo kit.

F22C with Precision 5857 turbo 3

S2000 with Mase Engineering turbo kit with Precision 5857 turbo

Once the turbo kit was installed, it was time to tune it. 

Turbo S2000 on dyno 2

Turbo S2000 on dyno 1

It was strapdown and ready to tune.

wheel rolling on the dyno

The owner recently picked up new CCW wheels.  11.5″ wide in the rear and 10″ wide in the front. 

Jason Oefelein tuning a turbo S2000 with AEM

Jason Oefelein tuning the S2000 with AEM.

Here is a video of the dyno run.

Turbo Honda S2000 (PT 5857) on dyno at PSI from Portland Speed Industries on Vimeo.

Tags: , , , , , , , , ,

3 Responses to “Turbo S2000 (PT5857)”

  1. [...] Here is a link to a write-up about Eric’s S2000 on our blog, http://blog.tunedbypsi.com/turbo-s2000-pt5857/. [...]

  2. anthony says:

    what size are the rims? 17?s

  3. Kyle Tomita says:

    CCW LM20s 18×10 Front and 18×11.5 Rear